Program: Develop Educational Content for SIPI hands on Experiential Learning

Building Python scripts to create Ansys models for an SIPI curriculum with parameterized input parameters and setup, including the analysis and display of the behavior

  1. Uniform MS, SL transmission lines
  2. Uniform coupled MS, SL transmission lines
  3. Uniform transmission lines with signal discontinuities: corners, DC blocking caps
  4. Uniform transmission lines with return path gaps
  5. SE and diff crosstalk in intra-layer, interlayer, and low-coupling structures
  6. Differential via structures and coupling to planes
  7. Cavities with shorting vias and shorting capacitors
  8. Exploring copper roughness and frequency dependence of loss
  9. Differences between 3D full-wave and 2D quasi-static tools and predicted behaviors

 

Creating video content for a new Coursera course in HSDE (with Prof Piket-May)

  1. Signal integrity 101
  2. Signals in the time and frequency domains
  3. PDN design and analysis
  4. Transmission line properties
  5. Transmission line circuits
  6. High Speed Serial Links
  7. S-parameters
  8. Circuit simulation with uSIMMICs
  9. Simulation with Python based tools
  10. Circuit Simulation with Keysight ADS
  11. TDR and VNA measurement methods
  12. EM Simulation with Ansys HFSS and SI wave
  13. EM Simulation with Cadence Clarity and Sigrity
  14. EM simulation with Siemens HyperLynx

 

Open-source boards that demonstrate specific SIPI best and pathological design, measurement, analysis, and measurement-simulation practices

  1. Solderless breadboard circuits and bandwidth limitations
  2. Switching noise and ground bounce examples
  3. Inrush current measurement
  4. Trace resistance and maximum current
  5. Golden Arduino and switching noise shield
  6. Crosstalk in signal and return path coupling, including copper pour and guard traces
  7. Fast drivers, IBIS models, and transmission line effects
  8. TDR test boards
  9. VNA test boards
  10. Breakout boards for connector and cable technologies: USB, Ethernet, HDMI, 
  11. Diff pair test boards
  12. Low impedance 2-port test boards
  13. 4-port COTS SIPI evaluation boards 
  14. Evaluation of COTS components and boards

     

Measurement-simulation correlation best practices

  1. Best measurement practices using instruments such as VNA and scopes
  2. Best simulation practices using pro-level simulation tools:
    1. Cadence Clarity, Sigrity
    2. Ansys HFSS, 2D Extractors, SI Wave
    3. Simbeor
  3. Best practices for absolute accuracy validated by canonical structures and well-characterized test vehicles
  4. Closing the loop between the as-designed parameters and the as-fabricated parameters, with cross-section and profilometry measurements
  5. Extracting as-fabricated material properties
  6. Measured Behavioral models with fixtures de-embedded
  7. Exploring negative-length circuit topology elements for general de-embedding
  8. Dead reckoning of simulated behaviors based on as-design parameters
  9. Measurement-based topology circuit models 
  10. Apply these approaches to various COTS evaluation boards from vendors such as Samtec and Wild River Technologies
  11. Develop a few simple test structures as standard structures to evaluate a measurement-simulation process such as a differential via structure with short differential pairs
  12. Apply EVM and similarity metrics to compare measurement and simulation correlation and model bandwidth

 

Measurement-simulation correlation of engineered PDN profiles and transient current response

  1. Build and characterize impedance profiles with LC elements, such as Bandini mountain and other parallel resonance peaks
  2. Build high-current slammer circuits
  3. Measure and simulate transient voltage responses based on the impedance peaks in the PDN
  4. Use uC or uP-based functional boards for in situ power rail measurements on-die and on-board
  5. Translate 2-port measured impedance into 1-port SPICE models and measurement-based circuit topology models
  6. Using snubber circuits with controlled ESR caps, series resistors, and tantalum capacitors

 

Practical high-speed serial link examples

  1. Develop a 5 Gbps $5 source
  2. Develop a 16 Gbps source with an FPGA eval board
  3. Explore passive sniffer circuits and impact on the signals
  4. Develop a series of impairment boards, with SMA connections for direct measurement and insertion into high speed serial links
    1. Long lines
    2. Stubs
    3. Vias and cavity coupling
    4. Skew
    5. Return path discontinuities
    6. Coupling to high Q resonant structures
    7. Serpentine and meander structures
  5. Measure S-parameter behavioral models
  6. Build measurement-based circuit topology models
  7. Import ODB++ files and simulate the S-parameters with 3D full wave solvers
  8. Measurement- simulation correlation of the serial data from the TX and through the interconnect

 

Radiated emissions from PCB structures

  1. Using simulated power loss from S-parameters in lossless interconnects compared to radiated emissions
  2. Radiation from uniform MS, SL
  3. Radiation from signal path discontinuities
  4. Radiation from return path discontinuities and resonant structures
  5. Radiation from vias through cavities
  6. Radiation and non-TEM behavior in MS, w and wo coplanar ground, w and wo shorting vias, comparing thick and thin dielectric layers
  7. Impact of SMA launches on radiation
  8. Measurements by common currents and in reverb chamber