The 2022 Bridge Builder Conference will be held on the campus of the University of Colorado in Boulder, CO. The 600-acre campus located in north central Colorado will provide the backdrop for a weekend of learning and networking as bridge builders gather from across the world.
Friday Afternoon Clay Shoot!
The Clay Shoot will be a new, optional event this year to engage Alumni, Professionals, and Returning Students during the regular conference welcome activities! It will run from 1:00 PM - 6:00 PM at Colorado Clay with the following breakdown:
1:00 - 2:00 Registration
2:00 - 2:30 Safety Talk
2:30 - 4:30 Clay Shoot Tournament
4:30 - 5:00 Cocktail Hour
5:00 - 6:00 Dinner and Award
6:00 - 9:00 Return to CU Boulder Campus
The pre-requisites for students who wish to register for the clay shoot are (1) this is a 21+ event and (2) you must have attended conference before in the past. Transportation to and from Colorado Clay is not provided, but the best method will most likely be carpool and/or Uber. Also note that participation in this event is not mandatory, in fact, a maximum of 1-2 students from each team should plan on attending. Conference will still kick-off at campus, so you should plan to head there right after the clay shoot to join your teammates for the 1020 Presentations and Networking! Finally, if you are interested in registering, please follow this google link.
Getting to Campus
Address: 1111 Engineering Dr. Boulder, CO 80302
By Bus
The Denver Airport Station serves RTD route AB, which will take you to Downtown Boulder Station, or other intermediate stations. This station is located at Denver International Airport at the DEN Transit Center, Level 1, adjacent to the Westin Denver International Airport. The DEN Transit Center can be accessed at the south end of Jeppesen Terminal by exiting through the glass doors and taking the escalator or elevator down to ground level.
RTD bus service operates from approximately 3:30 a.m. to midnight, with the last bus leaving the airport at 1:28 a.m.
RTD buses pick-up and drop-off passengers at the DEN Transit Center.
Buses depart approximately every 15 minutes during peak hours and drivers will help you load and unload your luggage.
All buses are wheelchair accessible.
An RTD information booth is located at the DEN Transit Center.
For mobile ticketing information see RTD.
By Car
Directions from the Denver area and south: To get to Boulder from the Denver area, go west on U.S. 36 (from I-25 or I-270) and exit at Baseline Road. Turn left (west) on Baseline Road, then right (north) on Broadway. The campus is on the right. You will turn right onto Regent Drive, and the Engineering Center is the last building on the left.
Directions from the north: take U.S. 287 south to Highway 119 (Diagonal Highway). Highway 119 becomes Highway 157 (Foothills Parkway) just north of Boulder. Turn right (west) from Foothills Parkway onto Baseline Road. Drive west on Baseline to Broadway, then turn right (north) on Broadway. The campus is on the right. You will turn right onto Regent Drive, and the Engineering Center is the last building on the left.
Directions from the west: Take I-70 east to U.S. 6. Go east on U.S. 6 to CO. 58. Turn right (east) on CO.58 to CO. 93. Make a left (north) onto CO. 93 towards Boulder. CO. 93 will turn into Broadway once in Boulder. Continue on Broadway (west) and you will see the campus on the right shortly after you pass Baseline Rd. The campus is on the right. You will turn right onto Regent Drive, and the Engineering Center is the last building on the left.
Directions from the east: Take South Boulder Road west to Boulder. South Boulder Road becomes Table Mesa Drive. Turn right (north) on Broadway. Travel approximately two miles and turn right (east) on Regent Drive, and the Engineering Center is the last building on the left.
By Plane
Flights can be booked to the Denver International Airport (Airport ID: DEN). This airport is located within 45 miles of the campus of CU Boulder and RTD bus service is offered here.