| Title | Created | Resolved | |
|---|---|---|---|
| Service Maintenance: UCB Files | Friday, May 24, 2013 - 10:00pm | Friday, May 24, 2013 - 11:59pm | VIEW |
| Service Maintenance: Microsoft Exchange | Friday, May 24, 2013 - 10:00pm | Friday, May 24, 2013 - 11:59pm | VIEW |
| Service Maintenance: Mediasite Classroom Capture | Saturday, May 25, 2013 - 6:00am | Saturday, May 25, 2013 - 6:00pm | VIEW |
| Service Maintenance: Router Upgrade (Network Outages) | Thursday, May 30, 2013 - 6:00am | Thursday, May 30, 2013 - 7:00am | VIEW |
Cisco VPN - Launch with UAC Enabled
Overview
There are three options for using the VPN with a UAC each of which is explained below. The first four steps explain how to get to the VPN folder, where each process begins.
Use the following links to jump to a specific process:
Click image to view larger version.
Step 1
Click on Computer from the Start menu.
Click image to view larger version.
Step 2
Open your computer's Hard Disk Drive (C:).
Click image to view larger version.
Step 3
Open your Program Files (x86) folder.
Click image to view larger version.
Step 4
Open the folder labeled CU Boulder.
Click image to view larger version.
Step 5
Change the Compatibility
Open the VPN Client folder.
Click image to view larger version.
Step 6
Locate vpngui and right-click on it then select Properties.
Click image to view larger version.
Step 7
Click on the Compatibility tab and check the Run this program in compatibility mode for: box
Click image to view larger version.
Step 8
Select Windows XP (Service Pack 2) from the drop down menu then select Apply.
Click image to view larger version.
Step 9
Change to Administrator Access
Open the VPN Client folder.
*Note: Administrator access is needed for this process.
Click image to view larger version.
Step 10
Locate vpngui and right-click on it then select Properties.
Click image to view larger version.
Step 11
Click on the Compatibility tab and select the Run this program as an administrator box.
Click image to view larger version.
Step 12
Click Apply.
Click image to view larger version.
Step 13
Give Full Control to the Cisco VPN Folder and Subdirectories
Right click on the VPN Client folder and select Properties.
Click image to view larger version.
Step 14
Select the Security tab and click on the Advanced button.
Click image to view larger version.
Step 15
Click on Change Permissions (or Edit...) for the Users group.
Click image to view larger version.
Step 16
If the Users group does not have Full Control, select the Users group and then click Edit...
*Note: Make sure the Include inheriable permissions from this object’s parent box is checked.
Click image to view larger version.
Step 17
Check the Full Control box in the Allow column, then click OK.
BACK TO TOP