| Title | Created | Resolved | |
|---|---|---|---|
| Service Maintenance: Mediasite Classroom Capture | Saturday, May 25, 2013 - 6:00am | Saturday, May 25, 2013 - 6:00pm | VIEW |
| Service Maintenance: Router Upgrade (Network Outages) | Thursday, May 30, 2013 - 6:00am | Thursday, May 30, 2013 - 7:00am | VIEW |
PGP - Installation on an Intel-based Macintosh
Overview
This document shows how to install PGP on Intel-based Mac
Before you begin
- You must be running either Mac OS 10.5 or Mac OS 10.6 (Intel Platform)
- Do not upgrade your Mac OS while you are already running PGP Whole disk encryption. You must decrypt your system first. Not decrypting prior to upgrading your mac could cause a complete loss of data.
- Make sure you have an Intel-based Mac. PGP will NOT work on a PowerPC Mac.
- Admin access is required for installation.
- Encryption can take a long time depending on your disk size, from several minutes to several hours. Make sure your computer will have adequate time to perform this task uninterrupted.
- Download PGP software:
- PGPDesktop.tar.gz
- On-campus connection required. If off-campus, use CU-Boulder's VPN
Click image to view larger version.
Step 1
Double-click on the PGP file (PGPDesktop.tar.gz) you have downloaded to open the installation files.
Click image to view larger version.
Step 2
Inside the pgpdesktop9 folder there is a file called PGP.pkg. Double click on that file, as shown below.
Click image to view larger version.
Step 3
The installer will open. Click the Continue button.
Click image to view larger version.
Step 4
The Read Me screen will appear. After reading through the release notes, click the Continue button.
Click image to view larger version.
Step 5
Next is the Software License Agreement. Click on the Continue button.
Click image to view larger version.
Step 6
To continue installing the software, you must agree to the terms of the software license agreement, so click on the Agree button.
Click image to view larger version.
Step 7
The next step details the installation type and how much space PGP desktop will take on your hard drive. After reviewing the information, click on the Install button.
Click image to view larger version.
Step 8
Enter your computer's username and password. This is the username and password you use to log onto your computer. Then click on the OK button.
Click image to view larger version.
Step 9
The next step in the installation process informs you that a restart will be required. Click on the Continue Installation button.
Click image to view larger version.
Step 10
Once installation is complete you will be prompted to Restart your computer. Click on the Restart button.
Related Tutorial(s)
BACK TO TOP