Refereed Papers and Conference Proceedings

  1. Bennett, C. A., Lee, H. B., Peterson, G. P., and Yoon, D., "Three Studies of Parameters of Consumer Products," Proceedings of the Human Factors Society, pp. 31-34, October 1978.
  2. Peterson, G. P. and Konz, S. A., "Inspection: A Case Study," Transactions of the American Society for Quality Control, Tulsa, Okla., pp. 1-6, October 9-10, 1980.
  3. Peterson, G. P. and Konz, S. A., "Visual Problems During Repetitive Inspection," Proceedings of the American Industrial Hygiene Conference, Portland, Oregon, pp. 106-112, June 1981.
  4. Peterson, G. P., "Heat Pipe Heat Exchangers in Waste Heat Recovery," Proceedings of the ASME/ETCE Industrial Pollution Control Symposium, Houston, Texas, pp. 94-98, January 30-February 3, 1983.
  5. Peterson, G. P., "Two-Phase Thermal Control Systems for Spacecraft Instrumentation," 18th AIAA Thermophysics Conference, Paper No. AIAA 83-1489, Montreal, Canada, June 1-3, 1983.
  6. Peterson, G. P. and Stalmach, D. D., "Concept Evaluation of Four Thermal Utility Systems for Low Orbit Spacecraft," 13th SAE/ASME Intersociety Conference on Environmental Systems, SAE Paper No. 11ES3, San Francisco, CA, July 11-13, 1983.
  7. Henry, J. and Peterson, G. P., A Combination Programmable Controller/Robotics Laboratory for Engineering Technology Programs," Institute of Electronic and Electrical Engineers (IEEE), Frontiers in Education Conference Proceedings, Worcester, Massachusetts, pp. 231-236, October 17-19, 1983.
  8. Peterson, G. P., Gowdy, K. K. and Henry, J. C., "Robotics Application Research in Engineering Technology," 1984 ASEE Annual Conference Proceedings, pp. 891-895, June 18-24, 1984.
  9. Peterson, G. P., "Integration of Robotics Instruction Into an Engineering Technology Program," ASEE Pacific Southwest Conference Proceedings, Tempe, Arizona, October 29-30, 1984.
  10. Peterson, G. P. and Anderson, M. A., "Development of a Flexible Welding Cell," 1984 Autoweld Conference Proceedings, St. Louis, Missouri, pp. 146-153, November 6-7, 1984.
  11. Peterson, G. P., "Heat Pipe Modeling and Simulation," AIAA 23rd Aerospace Sciences Meeting, Paper No. AIAA 85-0152, Reno, Nevada, January 14-17, 1985.
  12. Peterson, G. P. and Niznik, B. D., "Robotics in the Manufacture of Oil Field Equipment," 7th ASME/ETCE Drilling and Production Symposium Conference Proceedings, Dallas, Texas, pp. 100-107, February 17-21, 1985.
  13. Peterson, G. P. and Hunt, A. C., "Advanced Scanning Architecture Systems Composite Material Evaluation," AIAA 26th Structures, Structural Dynamics and Materials Conference, Paper No. AIAA 85-0724, Orlando, Florida, April 15-17, 1985.
  14. Peterson, G. P., Vittrup, J. B., "The FESS Plan for Development of Programmable Automation Laboratories for Research and Instruction," 1985 ASEE Annual Conference Proceedings, Atlanta, Georgia, pp. 172-174, June 16-20, 1985.
  15. Peterson, G. P., "Heat Pipe Thermal Control of Electronic Components," AIAA 20th Thermophysics Conference, Paper No. AIAA 85-0937, Williamsburg, Virginia, June 19-21, 1985.
  16. Fletcher, L. S. and Peterson, G. P., "The Effect of Interstitial Materials on the Thermal Contact Conductance of Metallic Junctions," Proceedings of the Heat Transfer in Thermal Systems Seminar-Phase II, National Cheng Kung University, Tianan, Taiwan, pp. 1-8, January 13-14, 1986.
  17. Peterson, G. P., Niznik, B. and Chan, L. M. "Efficient End-of-Arm Tooling for the Insertion of Printed Circuit Boards," Proceedings of the 1986 ASME/SAE Electronic Manufacturing Technologies and Systems Conference, Los Angeles, California, pp. 294-304, March 17-20, 1986.
  18. Kundu, N., Peterson, G. P. and Riley, K., "Pressure Intensification and Control Using Programmable Controllers," 1986 ASEE Annual Conference Proceedings, Cincinnati, Ohio, pp. 759-763, June 22-26, 1986.
  19. Peterson, G. P. and Fletcher, L. S., "Thermal Contact Conductance Between Spherical Particles and Flat Surfaces," 8th International Heat Transfer Conference, Open Forum, #OP-6C-9, San Francisco, Calf., August 17-22, 1986, (Received an award for Outstanding Presentation in Poster Format).
  20. Kundu, N. and Peterson, G. P., "Two-Phase Slurries for the Transport of Solid Particulate Matter," Proceedings of the 10th International Conference on the Hydraulic Transport of Solids in Pipes, Innsbruk, Austria, pp. 311-317, October 29-31, 1986.
  21. Peterson, G. P., "Analytical Development and Computer Modeling of a Bellows Type Heat Pipe for Cooling of Electronic Components," ASME Paper No. 86-WA/HT-69, ASME Winter Annual Meeting, Anaheim, California, December 7-12, 1986.
  22. Peterson, G. P., "Thermal Contact Resistance in Waste Heat Recovery Systems," Proceedings of the 8th ASME/ETCE Hydrocarbon Processing Symposium, Dallas, Texas, pp. 45-51, February 15-19, 1987.
  23. Kundu, N. and Peterson, G. P., "Thermal Conductivity of Offshore Pipeline Coating Materials," Proceedings of the 4th ASME/ETCE Pipeline Conference, Dallas, TX, pp. 173-177, February 15-19, 1987.
  24. Peterson, G. P. and Fletcher, L. S., "Thermal Contact Resistance of Silicon Chip Bonding Materials," Proceedings of the International Symposium on Cooling Technology for Electronic Equipment, Honolulu, Hawaii, pp. 438-448, March 18-21, 1987.
  25. Peterson, G. P. and Fletcher, L. S., "A Review of the Thermal Conductivity of Composite Materials," 22nd AIAA Thermophysics Conference, Paper No. AIAA 87-1586, Honolulu, Hawaii, June 8-10, 1987.
  26. Peterson, G. P. "Analytical Comparison of Three External Artery Heat Pipes," 22nd AIAA Thermophysics Conference, Paper No. AIAA 87-1616, Honolulu, Hawaii, pp. 438-448, June 8-10, 1987.
  27. Park, J. S. and Peterson G. P., "Turbulent Heat Transfer in Hydrodynamic and Thermal Entrance Regions of a Square Duct," Proceedings of the 10th Korea Symposium on Science and Technology, Seoul, Korea, Vol. II, pp. 162-169, July 7-18, 1987.
  28. Park, J. S. and Peterson, G. P., "A Study of Numerical Modeling of Combustion of Korean Anthracite Briquettes," Proceedings of the 10th Korea Symposium on Science and Technology, Seoul, Korea, Vol. 1, pp. 35-38, July 7-18, 1987.
  29. Peterson, G. P., "Heat Removal Key to Shrinking Avionics," Aerospace America, No. 8, pp. 20-22, October 1987.
  30. Peterson, G. P., "Thermophysics Highlights," Aerospace America, No. 12, pp. 22, December 1987.
  31. Peterson, G. P. and Fletcher, L. S., "Thermal Contact Conductance in the Presence of Thin Metallic Foils," 26th AIAA Aerospace Sciences Meeting, Paper No. AIAA 88-0466, Reno, Nevada, January 11-14, 1988.
  32. Peterson, G. P., "Reducing the Thermal Contact Resistance in Heat Exchangers," Proceedings of the Technical Economics Symposium, New Orleans, Louisiana, pp. 89-94, January 15-19, 1988.
  33. Ochterbeck, J. M., Fletcher, L. S. and Peterson, G. P., "Experimental Investigation of Thermal Contact Conductance at the Interface Between Bone and PMMA Cements," 6th Annual Meeting on Biomedical Research, Houston, Texas, February 12, 1988.
  34. Moses, W. M., Chowdhury, A. H., Peterson, G. P. and Rogers T. D., "Performance Characterization of a Waste/Water Recovery System," Proceedings of the Controlled Environmental Life Support System Research Conference, College Station, TX, February 22-23, 1988.
  35. Fletcher, L. S. and Peterson, G. P., "On the Thermal Contact Conductance Between Bone and Artificial Joints," Proceedings of the World Congress on Medical Physics and Biomedical Engineering, Paper No. BE-278-3, San Antonio, TX, August 6-12, 1988.
  36. Duncan, A. B., Peterson, G. P. and Fletcher, L. S., "Effective Conductivity Within Packed Beds of Spherical Particles," 1988 ASME Winter Annual Meeting, Chicago, Ill., pp. 77-88, Nov. 28-Dec. 2, 1988.
  37. Ochterbeck, J. M. and Peterson, G. P., "Frozen Heat Pipe Startup Characteristics in One-g and Micro-g Environments: Issues and Objectives," Proc. of the Commercialization of Space Fluid Management Workshop, NASA-Marshall Space Flight Center, Huntsville, Alabama, March 21-22, 1990, pp. 286-295.
  38. Peterson, G. P., "Analytical and Experimental Investigation of Micro Heat Pipes," Proc. of the 7th International Heat Pipe Conference, Paper No. A-4, Minsk, USSR, May 21-25, 1990.
  39. Ochterbeck, J. M., Peterson, G. P. and Fletcher, L. S., "Evaluation of Thermal Enhancement Films for Electronic Equipment," Proc. of the 9th International Heat Transfer Conference, Vol. 5, Jerusalem, Israel, pp. 445-451, August 19-22, 1990.
  40. Peterson, G. P., "On the Use of Micro Heat Pipes for the Thermal Control of Electronic Devices," 9th International Heat Transfer Conference, Open Forum, OPF II-11, Jerusalem, Israel, August 19-22, 1990.
  41. Babin, B. R., Leiner, W. and Peterson, G. P., "Cooling Electronic Components with Thermosyphons," 1990 ASME Winter Annual Meeting, Dallas, TX, ASME HTD-Vol.153, ASME New York N.Y., pp. 89-94, December 1990.
  42. Peterson, G. P., "Experimental and Analytical Investigations of Micro Heat Pipes," Research and Development in Heat Pipe Technology, Vol. 7, L. L. Vasiliev (ed.), Hemisphere Publishing, New York, N.Y., December 1990, pp. 243-251.
  43. Ochterbeck, J. M. and Peterson, G. P., "Frozen Heat Pipe Startup: A Shuttle Flight Experiment," 29th AIAA Aerospace Sciences Meeting, AIAA-91-0365, Reno, Nevada, January 7-10, 1991.
  44. Mallik, A. K., Peterson, G. P. and Weichold, M. H., "Construction Processes for Vapor Deposited Micro Heat Pipes," 10th Symp. on Electronic Materials Processing and Characteristics, June 3-4, 1991, Richardson, TX, (Received an award for Outstanding Poster Presentation).
  45. Peterson, G. P., Duncan, A. B., Ahmed, A. K., Mallik, A. K. and Weichold, M. H. "Experimental Investigation of Micro Heat Pipes in Silicon," 1991 ASME Winter Annual Meeting, ASME Vol. DSC-32, ASME New York N.Y., pp. 341-348, December 1-6, 1991.
  46. Peterson, G. P.,"Thermal Contact Conductance in Dual-in-line Packages," Proc. of the U.S.-Australia Joint Seminar on Thermal Contact Conductance in Microelectronics, Melbourne, Australia, pp. 7-12, May 1992.
  47. Kihm, K. D., Kim, B. H. and Peterson, G. P., "SMD Measurements of Intermittent Sprays Entrained from Wire Mesh Interfaces Driven by Parallel Convective Air Flows," 5th Annual Conference on Liquid Atomization and Spray Systems, San Ramon, CA, pp. 225-232, May 18-20, 1992.
  48. Mallik, A. K., Peterson, G. P. and Weichold, M. H., "Fabrication of Vapor Deposited Micro Heat Pipes," Proc. 11th Symp. on Electronic Materials Processing and Characteristics, June 1-2, 1992, Richardson, TX.
  49. Ochterbeck, J. M. and Peterson, G. P., "Experimental Investigation of Freezing Blowby in a Copper Water Heat Pipe," 1992 AIAA Thermophysics Conf., AIAA 92-290, Nashville, TN, July 6-8, 1992.
  50. Ochterbeck, J. M. and Peterson, G. P., "Experimental Investigation of Frozen Heat Pipe Startup in One-g and Micro-g Environments," Proc. 8th Int'l Heat Pipe Conf., Beijing, China, September 14-18, 1992, pp. 292-297.
  51. Peterson, G. P., "Investigation of Micro Heat Pipes Fabricated as an Integral Part of Silicon Wafers," Proc. 8th Int'l Heat Pipe Conf., Beijing, China, September 14-18, 1992, pp. 385-395.
  52. Peng, X. F., Wang, B. X. and Peterson, G. P., "Film and Transition Boiling Heat Transfer Characteristics of Subcooled Liquid Flowing Through a Horizontal Flat Duct," Proc. 1st European Thermal-Science and 3rd UK Nat'l. Heat Transfer Conf., September 16-18, 1992, Birmingham, England.
  53. Peterson, G. P., "An Overview of Micro Heat Pipes and Their Applications," Proc. 1st Korean Heat Pipe Conference., Pohang, Korea, September 20-23, 1992, pp. 77-91.
  54. Peterson, G. P., "An Overview of Heat Pipe Applications," ITRI Workshop on Heat Pipe Theory and Applications, Hinschu, Taiwan, ROC, December 9-12, 1992.
  55. Peterson, G. P., "Heat Pipes: Fundamentals of Operation," ITRI Workshop on Heat Pipe Theory and Applications, Hinschu, Taiwan, ROC, December 9-12, 1992.
  56. Howard, A. and Peterson, G. P., "The Effect of Multiple Layering on the Thermal Contact Conductance of Vapor Deposited Metallic Coatings," 1993 AIAA Aerospace Sciences Conference, AIAA 93-0843, Reno, NV, January 11-14, 1993.
  57. Kim, B. H., Peterson, G. P. and Kihm, K. D., "Experimental Investigation of Entrainment in Heat Pipe Wicking Structures," 1993 AIAA Aerospace Sciences Conference, AIAA 93-0281, Reno, NV, January 11-14, 1993.
  58. Ochterbeck, J. M., Peterson, G. P. and Ungar, E., "Acceleration Induced Depriming and Capillary Rewetting of External Artery Heat Pipes: Comparison with Share II Flight Experiment, 1993 AIAA Aerospace Sciences Conference, AIAA 92-0282, Reno, NV, January 11-14, 1993.
  59. Kihm, K. D., Kim, B. H. and Peterson, G. P., "Critical Velocity and Droplet SMD's of Entrained Sprays from Meshed-Interface Convective Air Streams," 6th Int. Symposium on Transport Phenomena in Thermal Engineering (ISTP-6), Seoul, Korea, May 9-13, 1993, pp. 431-434.
  60. Lu, X. F. and Peterson, G. P., "A Finite Element Analysis of the Freeze/Thaw Behavior of External Artery Heat Pipes," 1993 Thermophysics Conference, AIAA-93-2739, Orlando, FL, July 6-9, 1993.
  61. Peterson, G. P., "Microscale Heat Pipes in Silicon Devices," Proceedings of the 1994 JPL/DATATAPE Symposium on Thermal Control of Electronics, May 23-25, 1994, Pasadena, CA.
  62. Coudel, A., Fletcher, L. S. and Peterson, G. P., "A Correlation for the Thermal Contact Conductance of Interstitial Metallic Foils," Proc. 10th Int'l. Heat Transfer Conference, Vol. 6, Brighton, England, August 14-18, 1994, pp. 337-342.
  63. Ochterbeck, J and Peterson, G. P., "Current Status of Frozen Heat Pipe Startup Research," Proc. 10th Int'l. Heat Transfer Conference, Vol. 7, Brighton, England, August 14-18, 1994, pp. 351-356.
  64. Peterson, G. P., "An Overview of Conduction and Insulation," Invited Review, Proc. 10th Int'l. Heat Transfer Conference, August 14-18, 1994, Brighton, England.
  65. Juhasz, A. L. and Peterson, G. P., "Review of Advanced Radiator Technologies for Spacecraft Thermal Control," NASA Technical Memorandum, TM 4555, August 2, 1994, Washington D.C.
  66. Kitto, J. B., Fiveland, W. A., Latham, C. E. and Peterson, G. P., "Advances in Thermal Engineering," Mechanical Engineering, Vol. 117, No. 3, 1995, pp. 88-93.
  67. Boo, J. H., Lui, X. and Peterson, G. P., "Measurement of Evaporation/Condensation Heat Transfer through a Liquid-Vapor Interface in a Flat Plate Heat Pipe," Proc. 9th Int'l Heat Pipe Conf., Albuquerque, NM, Vol. 1, 1995, pp. 302-309.
  68. Noboa, H. and Peterson, G. P., "Thermodynamic Aspects of Heat Pipes," Proc. 9th Int'l Heat Pipe Conf., Albuquerque, NM, Vol. 1, 19095, pp. 568-572.
  69. Boo, J. H., Yoon C. and Peterson, G. P., "An Experimental Study of the Thermal Performance of a Capillary Pumped Loop having a Flat Evaporator," AIAA Paper #95-3514, 1995 National Heat Transfer Conference, Portland, OR, August 5-8, 1995.
  70. Shatto, D. P. and Peterson, G. P., Experimental Investigation of the Effects of Velocity and Subcooling on the Critical Heat Flux in a Circular Tube," AIAA Paper #95-3513, 1995 National Heat Transfer Conference, Portland, OR, August 5-8, 1995.
  71. Ma, H. B. and Peterson, G. P., "Theoretical Analysis of the Maximum Heat Transport in Triangular Grooves: Study of Idealized "Micro" Heat Pipes," 1995 ASME IMECE Meeting, Proc. ASME Heat Transfer Division, HTD-Vol. 317-1, November 12-17, 1995, San Francisco, CA, pp. 185-192.
  72. Ma, H. B. and Peterson, G. P., "Characteristics of the Minimum Meniscus Radius in Micro Heat Pipes," 34th AIAA Aerospace Sciences Conference, AIAA 96-0476, Reno, NV, January 15-18, 1996.
  73. Liu, X. Q. and Peterson, G. P., "Numerical Analysis of Vapor Flow in a Micro Heat Pipe with Rectangular Grooves," 34th AIAA Aerospace Sciences Conference, AIAA 96-0475, Reno, NV, January 15-18, 1996.
  74. Shatto, D., Morris, T. K. and Peterson, G. P., "A Visualization Study of Pool Boiling in Reduced Gravity," Energy Week Conference Proc., Vol. IV, Houston, TX, January 29-February 3, 1996, pp. 22-30.
  75. Benson, D. A., Adkins, D. R., Peterson, G. P., Mitchell, R. T., Tuck, M. R. and Palmer, D. W., "Turning Silicon Substrates into Diamond: Micromachining Heat Pipes," Advances in Design, Materials and Processes for Thermal Spreaders and Heat Sinks Workshop, Vail, CO, April 19-21, 1996.
  76. Angirasa, D. and Peterson, G.P., "Numerical Modeling of High Performance Metallic Fibrous Heat Sinks for External Cooling," Proc. Intersociety Conf. on Thermal Phenomena in Electronic Systems (ITHERM '96), May 29 - June 1, 1996, Orlando, FL, pp. 203-210.
  77. Shatto, D., Renzi, K., Peterson, G. P., Morris, T. K., and Aaron, J. W., "An Experimental Study of Pool Boiling Heat Transfer in Reduced Gravity," 1996 National Heat Transfer Conference, Proc. AIChE Symposium Series, Vol. 92, August 3-5, 1996, Houston, TX, pp. 52-59.
  78. Angirasa, D. and Peterson, G. P., "Forced Convection Heat Transfer Augmentation in a Channel with a Localized Heat Source Using Fibrous Material," Proc. ASME Heat Transfer Division, HTD-Vol. 330-7, August 3-5, 1996, Houston, TX, pp. 141-149.
  79. Peterson, G. P., Benson, D. A., Adkins, D. R., Mitchell, R. T., Tuck, M. R. And Palmer, D. W., "Ultra High Capacity Micro Machined Heat Spreaders," Paper No. 1-A Proc. 2nd US/Japan-Molecular and Microscale Phenomena Conf., August 8-10, 1996, Santa Barbara, CA.
  80. Ma, H. B. and Peterson, G. P., “Experimental Investigation of the Thermal Capillary Limit of a Novel Micro Heat Pipe," 1997 AIAA Aerospace Sciences Conf., AIAA 97-0979, Reno, NV, January 6-9, 1997.
  81. Camarda, C. J., Rummler, D. R. and Peterson, G. P., "Multi Heat Pipe Panels," NASA Tech Briefs, LAR-14150, 1997.
  82. Angirasa, D. and Peterson, G. P., "Natural Convection in a Downward Facing Horizontal Surface in a Saturated Porous Medium," Proc. Of the 1997 Energy Week Conf., Vol. 1, Houston, TX, January 28-30, 1997, pp. 1-9.
  83. Angirasa, D. and Peterson, G. P., " "Natural Convection Above a Horizontal Surface in a Saturated Porous Medium," Proc. Of the 1997 Energy Week Conf., Vol. 1, Houston, TX, January 28-30, 1997, pp. 10-19.
  84. Peterson, G. P., “Ultra High Capacity, Micromachined Heat Spreaders - Invited Paper," Proc. Pacific Rim Thermal Science and Energy Engineering Workshop, Hong Kong, March 9-12, 1997, pp. 20.
  85. Peterson, G. P. and Peng, X. F., “Transient Conduction in Two-Dimensional Two-Component Composite Systems - Invited Paper," Proc. 4th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, vol.1, Brussels, Belgium, June 2-6, 1997, pp. 85-92.
  86. Morris, T. K., Ran, Q., Marsh, K. N., Peterson, G. P. and Holste, J. C., “Vapor Pressure Measurements for Dichlorosilane, Trichlorosilane and Tetrachlorosilane,” Proc. 13th Symposium on Thermpophysical Properties, Boulder, CO, June 22-27, 1997.
  87. Shatto, D. P., Renzi, K. and Peterson, G. P., “An Experimental Study of Pulse Boiling in a Two-Phase Thermosyphon,” Proc. ASME Heat Transfer Division, HTD-Vol. 342, Baltimore, MA, August 10-12, 1997, pp. 147-155.
  88. Peterson, G. P., “Advances in Phase Change Microscale Heat Spreaders for Electronic Applications Invited Paper,” Proc. 10th International Heat Pipe Conf., Stuttgart, Germany, September 22-26, 1997.
  89. Dickey, J. T. and Peterson, G. P., “Thermal Characterization of Two-Phase Heat Transfer in Porous Materials: An Experimentally Confirmed Method in Non-dimensionalized Form," Proc. ASME Heat Transfer Division, HTD-Vol. 62, Dallas, TX, November 16-21, 1997, pp. 221-230.
  90. Angirasa, D., Frank Pyrtle, III and Peterson, G. P., “Experimental Investigation of Metallic Fibrous Heat Sinks for External Cooling of an Electronic Package,” Proc. ASME Heat Transfer Division, HTD-Vol. 62, Dallas, TX, November 16-21, 1997, pp. 279-286.
  91. Ma, H. B. and Peterson, G. P., “Disjoining Pressure Effect on the Wetting Characteristics in a Capillary Tube,” 2nd Microtherm Workshop, Albuquerque, NM, June 114 -15, 1998.
  92. Peterson, G. P. and H. B. Ma, “Temperature Response and Heat Transfer in a Micro Heat Pipe,” 1998 AIAA/ASME Joint Thermophysics and Heat Transfer Conf., HTD Vol. 357-3, Albuquerque, NM, June 114 -15, 1998, pp. 233-242.
  93. Boo, J., Sohn, S. P. and Peterson, G. P., “Experimental Investigation of Heat Transfer at the Liquid-Vapor Interface in a Flat Heat Pipe,” Proc. 1998 Int’l Heat Transfer Conf., Vol. 2, August 23-28, 1998, pp. 81-86.
  94. Dickey, J. T. and Peterson, G. P., “Moody’s Diagram and Heat Transfer Frictional Flow Losses in Porous Materials,” Proc. Of the International, Intersociety, Electronic Packaging Conf., June 13-19, 1999, Maui, Hawaii.
  95. Peterson, G. P., “Flexible, Highly Conductive Heat Spreaders Utilizing Micro Structures and Phase Change Processes,” NSF Japan/US Joint Workshop on Molecular and Microscale Thermophysical Phenomena in Nanotechnology, Sendai, Japan, August 8-11, 1999.
  96. Westheimer, D. and Peterson, G. P., “Visualization of Flow Boiling in an Annular Heat Exchanger under Micro Gravity Conditions,” paper no. AIAA-2000-0967, 38th Aerospace Sciences Meeting, January 10-13, 2000, Reno, NV.
  97. Barron, R., Hu, H. and Peterson, G. P., “Experimental Study of Condensation in Micro Grooved Plates,” paper no. AIAA-2000-0965, 38th Aerospace Sciences Meeting, January 10-13, 2000, Reno, NV.
  98. Wang, Y., Ma, H. B. and Peterson, G. P., “Investigation of the Temperature Distributions on Radiator Fins with Micro Heat Pipes,” paper no. AIAA-2000-0969, 38th Aerospace Sciences Meeting, January 10-13, 2000, Reno, NV.
  99. Chesser, J., Peterson, G. P., and Lee, S., “A Simplified Method for Determining the Capillary Limitation of Flat Plate Heat Pipes in Electronic Cooling Applications,” paper no. AIAA 2000-12161, National Heat Transfer Conf., Pittsburgh, PA, August 20-22, 2000.
  100. Ma, H. B. and Peterson, G. P., “Heat Transfer Performance Analysis of a Heat Sink,” paper no. 2000-1612, National Heat Transfer Conf., Pittsburgh, PA, August 20-22, 2000.
  101. Wang, Y. and Peterson, G. P., “Experimental Investigation of Wire Bonded Micro Heat Pipe Arrays,” paper no. AIAA-2001-3092, 35th AIAA Thermophysics Conference, Anaheim, CA June 11-14, 2001.
  102. McDaniels, D. and Peterson, G. P., “Investigation Polymer Based Micro Heat Pipes for Flexible Spacecraft Radiators,” Proc. ASME Heat Transfer Division, HTD-Vol. 142 New York, NY, November 11-16, 2001.
  103. Wang, Y. and Peterson, G. P., “Experimental Investigation of Micro Heat Pipe Radiators in a Radiation Environment,” Proc. ASME Heat Transfer Division, HTD-Vol. 142, New York, NY, November 11-16, 2001.
  104. Wang, Y. and Peterson, G. P., “Capillary Evaporation in Microchanneled Polymer Films,” paper no. AIAA-2002-2767, 8th AMSE/AIAA Joint Thermophysics and heat Transfer Conference, St. Louis , MO, June 24-27, 2002.
  105. Wang, Y. and Peterson, G. P., “Investigation of This Film Evaporation Limit in a Single Screen Mesh Layer,” Proc. ASME Heat Transfer Division, HTD-Vol. 142, New Orleans, LA, November 17-22, 2002.
  106. Wang, Y., Peterson, G. P. and Q. Chen, “Investigation of the Heat Transfer Limits in Thin Capillary Wicks of Phase-Change Cooling Devices,” Proc. ASME-JSME Thermal Engineering Conference, TED-AJ03-638, Kohala Coast, Hawaii, March 16-20, 2003.
  107. Wang, Y. and Peterson, G. P., “Investigation of Novel Flat Plate Heat Pipe,” Proc. ASME Heat Transfer Division, HTD-Vol. paper no. 47083, Las Vegas NV, July 21-23, 2003.
  108. Wang, Y. and Peterson, G. P., “Flat Plate Heat Pipe Cooling Device for Mobile Computers,” Proc. ASME Heat Transfer Division, HTD-Vol.3, paper no. 43930, Washington, D.C., November 15-21, 2003.
  109. Li, C., Peterson, G. P. and Wang, Y., “Capillary Condensation on Micro-Finned Surfaces,” AIAA Aerospace Sciences, paper no. AIAA 2004-0162, 42nd Aerospace Sciences Meeting, January 5-8, 2004, Reno, NV.
  110. Sobhan, C. B. and Peterson, G. P, “Modeling of the Flow and Heat Transfer in Micro Heat Pipes,” 2nd International Conference on Microchannels and Minichannels, Rochester, NY, June 15-17, 2004.
  111. Ma, H. B., Lofgreen, K. P. and Peterson, G. P., “An Experimental Investigation of a High Flux Heat Pipe Heat Sink, Proc. ASME Heat Transfer Division, accepted for publication, Washington, D.C., November 13-19, 2004.
  112. Jiao, A., Reigler, R. Ma, H. B. and Peterson, G. P, “Groove Geometry Effect on the Thin Film Evaporation and Heat transport Capability of a Grooved Heat Pipe,” 13th International Heat Pipe Conference, Shanghai, China, September 21-25, 2004.
  113. Wang, Y., Hwang, C., Huang, D. and Peterson, G. P., “Investigation of The High-power Density Phase-Change Heat Spreader Devices” 13th International Heat Pipe Conference, Shanghai, China, September 21-25, 2004
  114. Wang, B. X., Li, H., Peng, X. F. and Peterson, G. P., “Numerical Simulation for Microconvection around Brownian Motion Moving Nano-Particles,” 3rd Int’l Symposium on Two-Phase Flow Modeling and Experimentation, Pisa, Italy, September 22-24, 2004.
  115. Li, C and Peterson, G. P., “Experimental Study of Thickness Effects in Evaporation-Boiling on Thin Sintered Copper Mesh Surfaces,” Proc. ASME Heat Transfer Division, NHTC2005-72431, San Francisco, CA, July 17-22, 2005.
  116. Carbjal, G., Sobhan, C. B. and Peterson, G. P., “Analysis of the Evaporation Process in a High Heat Flux Flat Plate Heat Pipe,” 2005 International Mechanical Engineering Congress – Orlando, FL, November 5-11, 2005, accepted for publication.
  117. Li, C., Peterson and G. P. “Experimental Study of the Effects of Volumetric Porosity and Pore Size on Evaporation/Boiling from Capillary Wicks,” 2005 International Mechanical Engineering Congress – Orlando, FL, November 5-11, 2005, accepted for publication.
  118. Li, H. and Peterson, G. P., “Effective Thermal Conductivity of Suspended Nanoparticles,” 2005 International Mechanical Engineering Congress – Orlando, FL, November 5-11, 2005, accepted for publication.
  119. Chen, Y. and Peterson, G. P., “Influence of hydraulic Diameter on Flow Condensation in Silicon Microchannels,” 13th International Heat pipe Conference – Sydney Australia, August 13-18, 2006, accepted for publication.
 		Additional Information


Let us know what you think of our site!