Refereed Journal Publications

  1. Konz, S. A., Peterson, G. P. and Joshi, A., "Reducing Inspection Errors," Quality Progress, Vol. 14, No. 7, 1981, pp. 24-27.
  2. Peterson, G. P., "Priming Considerations of Heat Pipes in Zero-g," Heat Transfer and Fluid Mechanics Institute, Vol. 28, 1982, pp. 201-211.
  3. Peterson, G. P., "Capillary Priming Characteristics of a High Capacity Dual Passage Heat Pipe," Chemical Engineering Communications, Vol. 27, No. 1, 1984, pp. 119-126, (also as ASME Paper No. ASME 82-HT-14, June 1982.
  4. Peterson, G. P., "Pre-machining of Bearing Carriers," Robotics and Factories of the Future, S. N. Dwividi (ed.), Springer-Verlag, 1984, pp. 163-174.
  5. Peterson, G. P., Marshal, P. F., "Analytical and Experimental Determination of Heat Pipe Priming in Micro-g," Research and Developments in Heat Pipe Technology, Vol. 5, K. Oshima (ed.), JaTech Publishing Co., 1984, pp. 434-439.
  6. Peterson, G. P., "Applied Research: A Cooperative Venture," Computer Aided Processes in Instruction and Research, edited by G. C. Beakley, Academic Press, 1985, pp. 353-366.
  7. Peterson, G. P., "Two-Phase Fluid Flow in Reduced Gravity Environments," Heat Transfer and Fluid Mechanics Institute, Vol. 29, 1985, pp. 45-59.
  8. Kundu, N. and Peterson, G. P., "Transmission of Solid Particulates Using a Two-Phase Medium," ASME Journal of Energy Resources Technology, Vol. 109, No. 1, 1986, pp. 35-39, (also in Proc. 7th ASME/ETCE Pipeline Engineering Symposium, pp. 131-137, February 1986).
  9. Peterson, G. P., "Thermal Control Systems for Spacecraft Instrumentation," AIAA J. Spacecraft and Rockets, Vol. 24, No. 1, 1986, pp. 7-14.
  10. Peterson, G. P. and Compagna, G. L., "A Review of Cryogenic Heat Pipes in Spacecraft Applications," AIAA J. Spacecraft and Rockets, Vol. 24, No. 2, 1986, pp. 99-101, (also as AIAA Paper No. 86-1254, June 1986).
  11. Grubbs, A. B. and Peterson, G. P., "Establishing an Applied Research Program," Journal of Engineering Technology, Vol. 3, No. 2, 1986, pp. 28-33, (also as ASME Paper No. 85-WAM-56, November 1985).
  12. Peterson, G. P., "Determination of the Cross-Sectional Temperature Distribution and Boiling Limitation of a Heat Pipe," AIAA J. Thermophysics and Heat Transfer, Vol. 1, No. 2, 1987, pp. 189-192, (also as AIAA Paper No. 86-0066, January 1986).
  13. Peterson, G. P. and Annamalai, K., "A Differential Approach to Heat Pipe Priming in Microgravity," Chemical Engineering Communications, Vol. 52, No. 1-3, 1987, pp. 151-161, (also in ASME FED-Vol. 42, ASME New York N.Y., pp. 25-31, December 1986).
  14. Peterson, G. P., Fletcher, L. S., and Peddicord, K. L., "Thermal Conductivity in Sphere-Pac Reactor Fuels," Journal of Nuclear Science and Technology, Vol. 24, No. 9, 1987, pp. 1-7, (also in Proc. 2nd ASME/JSME Thermal Engineering Joint Conf., pp. 439-444, March 1987).
  15. Peterson, G. P. and Fletcher, L. S., "Effective Thermal Conductivity of Sintered Heat Pipe Wicks," AIAA J. Thermophysics and Heat Transfer, Vol. 1, No. 4, 1987, pp. 343-347, (also as AIAA Paper No. 86-1362, June 1986).
  16. Peterson, G. P., "Analysis of a Heat Pipe Thermal Switch, Research and Developments in Heat Pipe Technology, Vol. 6, Hemisphere Publishing, New York, N.Y., 1987, pp. 177-183.
  17. Peterson, G. P. and Fletcher, L. S., "Thermal Contact Conductance of Packed Beds in Contact with Flat Surfaces," ASME J. Heat Transfer, Vol. 110, No. 1, February 1988, pp. 38-41.
  18. Peterson, G. P., Niznik B. and Chan, L. M., "Development of an Automatic Screwdriver for Use with Industrial Robots," IEEE J. Robotics and Automation, Vol. 4, No. 4., August 1988, pp. 411-413.
  19. Peterson, G. P. and Fletcher, L. S., "Evaluation of the Thermal Contact Conductance Between Mold Compound and Heat Spreader Materials," ASME J. Heat Transfer, Vol. 110, No. 4, November 1988, pp. 996-999, (also in ASME HTD-Vol. 69, ASME New York N.Y., pp. 99-106, August 1987).
  20. Peterson, G. P. and Fletcher, L. S., "Thermal Contact Resistance of Silicon Chip Bonding Materials," in Cooling Technology for Electronic Equipment, W. Aung (ed.), Hemisphere Publishing Corporation, New York, N.Y., pp. 523-534, 1988.
  21. Peterson, G. P., "Analytical Development and Computer Modeling of a Bellows Type Heat Pipe for Cooling of Electronic Components," Heat Transfer Engineering, Vol. 9, No. 3, 1988, pp. 101-109.
  22. Havis, C. R., Peterson, G. P. and Fletcher, L. S., "Thermal Conductivity of Aligned Fiber Composite Materials," AIAA J. Thermophysics and Heat Transfer, Vol. 3, No. 4, 1989, pp. 416-422, (also as AIAA Paper No. 88-2658, June 1988).
  23. Peterson, G. P. and Fletcher, L. S., "On the Thermal Conductivity of Dispersed Ceramics," ASME J. Heat Transfer, Vol. 111, No. 4, 1989, pp. 824-829, (also in ASME WAM-Vol. 2, ASME New York N.Y., pp. 77-84, December 1988).
  24. Duncan, A. B., Peterson, G. P. and Fletcher, L. S., "Effective Thermal Conductivity Within Packed Beds of Spherical Particles," ASME J. Heat Transfer, Vol. 111, No. 4, 1989, pp. 824-829.
  25. Childres, W. and Peterson, G. P., "Quantification of Thermal Contact Conductance in Electronic Packages," IEEE J. Components, Hybrids and Manufacturing Technologies, Vol. 12, No. 4, 1989, pp. 717-723, (also in Proc. 5th IEEE Thermal and Temperature Measurement Symposium, pp. 30-36, February 1989).
  26. Madhusudana, C. V., Fletcher, L. S. and Peterson, G. P., "Thermal Contact Conductance of Cylindrical Joints - A Critical Review," AIAA J. Thermophysics and Heat Transfer, Vol. 4, No. 2, April 1990, pp. 204-211, (also as AIAA Paper No. 89-0432, January 1989).
  27. Fletcher, L. S., Peterson, G. P., Cunnington, G. and Pandey, R. K., "Spectral Properties of Selected Superconducting Materials," AIAA J. Thermophysics and Heat Transfer, Vol. 4, No. 3, July 1990, pp. 412-414, (also as AIAA Paper No. 89-1674, June 1989).
  28. Babin, B. R. and Peterson, G. P., "Experimental Investigation of a Flexible Bellows Heat Pipe for Cooling Discrete Heat Sources," ASME J. Heat Transfer, Vol. 112, No. 3, August 1990, pp. 602-607, (also as ASME Paper No. 89-HT-18, August 1989).
  29. Peterson, G. P. and Fletcher, L. S., "Measurement of the Thermal Contact Conductance and Thermal Conductivity of Anodized Aluminum Coatings," ASME J. Heat Transfer, Vol. 112, No. 3, August 1990, pp. 579-586, (also in ASME HTD-Vol. 123, ASME New York N.Y., pp. 117-124, December 1989).
  30. Babin, B. R., Peterson, G. P. and Wu, D., "Steady-state Modeling and Testing of a Micro Heat Pipe," ASME J. Heat Transfer, Vol. 112, No. 3, August 1990, pp. 595-601, (also as ASME Paper No. 89-HT-17, August 1989).
  31. Madhusudana, C. V., Peterson, G. P. and Fletcher, L. S., The Effect of Non-uniform Pressure on the Heat Transfer in Bolted and Riveted Joints," ASME J. Energy Resources Technology, Vol. 112, No. 3, September 1990, pp. 174-182, (also in ASME HTD-Vol. 1, ASME New York N.Y., pp. 57-67, Dec. 1988).
  32. Fletcher, L. S., Peterson, G. P., Madhusudana, C. V., and Groll, E., Constriction Resistance Through Bolted and Riveted Joints," ASME J. Heat Transfer, Vol. 112, No. 4, November 1990, pp. 857-863, (also in ASME HTD-Vol. 123, ASME New York N.Y., pp. 107-117, December 1989).
  33. Kang, T. K., Peterson, G. P. and Fletcher, L. S., "Effect of Metallic Coatings on the Thermal Contact Conductance of Turned Surfaces," ASME J. Heat Transfer, Vol. 112, No. 4, November 1990, pp. 864-871, (also as ASME Paper No. 89-HT-23, August 1989).
  34. Stevenson, P. F., Peterson, G. P. and Fletcher, L. S., "Thermal Rectification in Similar and Dissimilar Materials," ASME J. Heat Transfer, Vol. 113, No. 1, February 1991, pp. 30-36, (also in ASME HTD-Vol. 123, ASME New York N.Y., pp. 125-132, December 1989).
  35. Fletcher, L. S., Peterson, G. P. and Shaup, R., "Thermal Conductivity of Selected Superconducting Materials," ASME J. Heat Transfer, Vol. 113, No. 1, February 1991, pp. 274-276, (also in ASME HTD-Vol. 123, ASME New York N.Y., pp. 83-89, December 1989).
  36. Wu, D. and Peterson, G. P., "Investigation of the Transient Characteristics of a Micro Heat Pipe," AIAA J. Thermophysics and Heat Transfer, Vol. 5, No. 2, April, 1991, pp. 129-134, (also as AIAA Paper No. 90-0060, January 1990).
  37. Peterson, G. P., Starks, G. and Fletcher, "Thermal Conductance of Two Space Station Cold Plate Attachment Techniques," AIAA J. Thermophysics and Heat Transfer, Vol. 5, No. 2, April, 1991, pp. 246-247, (also as AIAA Paper No. 89-1703, June 1989).
  38. Veith, D., Peterson, G. P. and Fletcher, L. S., "Macroscopic Constriction Resistance in Microelectronic Packages," ASME J. Heat Transfer, Vol. 113, No. 2, May 1991, pp. 494-496, (also in ASME HTD-Vol. 129, ASME New York N.Y., pp. 119-125, June 1990).
  39. Saeed, B. and Peterson, G. P., "A Review of Rewetting of Hot Surfaces," Heat Transfer and Fluid Mechanics Institute, Vol. 32, June 1991, pp. 203-237.
  40. Peterson, G. P. and Fletcher, L. S., "Heat Transfer Enhancement Techniques for Space Station Cold Plates," AIAA J. of Thermophysics and Heat Transfer, Vol. 5, No. 3, July 1991, pp. 423-428, (also as AIAA Paper No. 90-0541, January 1990).
  41. Peterson, G. P. and Bage, B., "Entrainment Limitations in Thermosyphons and Heat Pipes," ASME J. Energy Resources Technology, Vol. 113, No. 3, September 1991, pp. 147-154, (also in ASME HTD-Vol. 117, ASME New York N.Y., pp. 1-9, December 1989).
  42. Wu, D., Peterson, G. P. and Chang, W. S., "Transient Experimental Investigation of Micro Heat Pipes," AIAA J. of Thermophysics and Heat Transfer, Vol. 5, No. 4, October 1991, pp. 539-545, (also as AIAA Paper No. 90-1791, June 1990, Received 1990 AIAA "Best Paper in Thermophysics Award").
  43. Peterson, G. P., Fletcher, L. S. and Blackler, D., "Thermal Performance of Thermal Pad Contact Heat Exchangers," AIAA J. of Thermophysics and Heat Transfer, Vol. 6, No. 1, February 1992, pp. 69-76, (also as AIAA Paper No. 91-0364, January 1991).
  44. Peng, X. F., Peterson, G. P. and Wang, B. X., "Capillary Induced Rewetting in a Flat Porous Cover Layer," Int. J. of Heat and Mass Transfer, Vol. 35, No. 2, February 1992, pp. 319-328.
  45. Ochterbeck, J. M., Peterson, G. P. and Fletcher, L. S., "Thermal Contact Conductance of Metallic Coated BiCaSrCuO Superconductor/Copper Interfaces at Cryogenic Temperatures," ASME J. Heat Transfer, Vol. 114, No. 1, February 1992, pp. 21-29, (also in ASME Paper HTD-Vol.1, ASME New York N.Y., pp. 275-284, March 1991).
  46. Peng, X. F. and Peterson, G. P., "Acceleration Induced Depriming of External Artery Heat Pipes," AIAA J. of Thermophysics and Heat Transfer, Vol. 6, No. 3, July, 1992, pp. 546-549.
  47. Peterson, G. P., "An Overview of Micro Heat Pipe Research," Invited Review Article, Applied Mechanics Review, Vol. 45, No. 5, May 1992, pp. 175-189.
  48. Peterson G. P. and Pavelka, J., "Common Condenser, Multi-Bellows Heat Pipe," IBM J. of Research and Development, Disclosure FI8-89-0447, Vol. 34, No. 10, March 1992, pp. 343-344.
  49. Peng, X. F. and Peterson, G. P., "Analytical Investigation of the Rewetting of Grooved Surfaces," AIAA J. of Thermophysics and Heat Transfer, Vol. 6., No. 3, July 1992, pp. 563-565, (also as AIAA Paper No. 91-4004, July 1991).
  50. Peng, X. F. Peterson, G. P. and Wang, B. X., "On the Wetting Mechanism of Liquid Flow on Hot Surfaces," Int. J. Heat & Mass Transfer, Vol. 35, No. 6, June 1992, pp. 1615-1624.
  51. Peterson, G. P., Peng. X. F. and B. X. Wang, "The Effect of Plate Temperature on the Onset of Rewetting," Int. J. Heat & Mass Transfer, Vol. 35, No. 6, June 1992, pp. 1605-1614.
  52. Peng, X. F. and Peterson, G. P., "Analysis of Rewetting for Surface Tension Induced Flow," ASME J. of Heat Transfer, Vol. 114, No. 3, August 1992, pp. 703-708.
  53. Peng, X. F., Wang, B. X. and Peterson, G. P., "Transition and Film Boiling Heat Transfer Characteristics for Forced Flow of Subcooled Liquid Flowing Through a Horizontal Flat Duct," Int. J. Heat and Mass Transfer, Vol. 35, No. 11, November 1992, pp. 3077-3084.
  54. Peterson, G. P. and Lu, X. J., X. F. Peng and Wang, B. X., "Analytical and Experimental Investigation of the Rewetting of Circular Channels with Internal V-Grooves," Int. J. Heat and Mass Transfer, Vol. 35, No. 11, November 1992, pp. 3085-3094.
  55. Mallik, A. K., Peterson, G. P. and Weichold, M. H., "On the Use of Micro Heat Pipes as an Integral Part of Semiconductor Devices," ASME J. of Electronic Packaging, Vol. 114, No. 4, 1992, pp. 436-442, (also in 3rd ASME-JSME Thermal Engineering Joint Conf. Proc., Vol. 2, pp. 394-401, March 1991).
  56. Ochterbeck, J. M. and Peterson, G. P., "Freeze/Thaw Characteristics of a Copper-Water Heat Pipe: Effects of Non-Condensible Gas Charge,” AIAA J. of Thermophysics and Heat Transfer, Vol. 7, No. 1, 1993, pp. 127-132.
  57. Peng, X. F., Peterson, G. P. and Lu, X. J., "Analysis of Capillary Induced Rewetting in Circular Channels with Internal Grooves," AIAA J. of Thermophysics and Heat Transfer, Vol. 7, No. 2, 1993, pp. 334-339.
  58. Babin, B. R., Peterson, G. P. and Seyed-Yagoobi, J., "Experimental Investigation of an Ion-Drag Pump Assisted Capillary Loop," AIAA J. of Thermophysics and Heat Transfer, Vol. 7, No. 2, 1993, pp. 340-345, (also as AIAA Paper No. 91-1401, June 1991).
  59. Peterson, G. P. and Chowdhury, A. H., "A Review of Advanced Radiator Technologies for Spacecraft Thermal Control," Int. J. of Heat and Technology, Vol. 11, No. 1, 1993, pp. 73-97.
  60. Peterson, G. P. and Wu, D., "A Review of Rotating and Revolving Heat Pipes," Int. J. of Heat and Technology, Vol. 11, No. 2, 1993, pp. 191-228.
  61. Peterson, G. P. and Peng, X. F., Experimental Investigation of Capillary Induced Rewetting for a Flat Porous Wicking Structure," ASME J. Energy Resources Technology, Vol. 115, No. 1, 1993, pp. 62-70, (also in ASME HTD-Vol. 106, ASME New York N.Y., pp. 341-348, December 1991).
  62. Peterson, G. P., Duncan, A. B. and Weichold, M. H., "Experimental Investigation of Micro Heat Pipes Fabricated in Silicon Wafers," ASME J. Heat Transfer, Vol. 115, No. 3, 1993, pp. 751-756.
  63. Kim, B. H., Peterson, G. P. and Kihm, K. D., "Analytical and Experimental Investigation of Entrainment in Capillary Pumped Wicking Structures," ASME J. Energy Resources Technology, Vol. 115, No. 4, 1993, pp.278-286.
  64. Swanson, L. and Peterson, G. P., "The Evaporating Extended Meniscus in a V-Shaped Channel," AIAA J. of Thermophysics and Heat Transfer, Vol. 8, No. 1, 1994, pp. 172-181, (also in ASME Paper HTD-Vol. 200, ASME New York N.Y., pp. 9-22, August 1992).
  65. Kihm, K. D., Kim, B. H. and Peterson, G. P., "Entrained Sprays from a Meshed-Interfaces Occurring in a Heat Pipe," AIAA J. Thermophysics and Heat Transfer, Vol. 8, No. 1, 1994, pp. 184-187.
  66. Lee, Y. M., Haji-Sheik, A., Fletcher, L. S. and Peterson, G. P., "Effective Thermal Conductivity in Multi-dimensional Bodies," ASME J. Heat Transfer, Vol. 116, No. 1, 1994, pp. 17-27, (also in ASME Vol. HTD-106, ASME New York, N.Y., pp. 1-9, August 9-12, 1992).
  67. Peterson, G. P., "Design and Technology of Heat Pipes for Cooling and Heat Exchange," Heat Transfer Engineering, Vol 15, No. 1, 1994, pp. 8.
  68. Ha, J. M. and Peterson, G. P., "Analytical Prediction of the Axial Dryout of an Evaporating Liquid Film in Triangular Micro Channels," ASME J. Heat Transfer, Vol. 116, No. 2, 1994, pp. 498-503, (also in ASME Vol. HTD Vol. 253, ASME New York N.Y., pp. 53-62, August 8-11, 1993).
  69. Peterson, G. P. and N. K. Muraya, "Heat Pipe Applications in the Energy Industry," in Research Trends in Chemical Engineering, Hemisphere Publ. Co., New York, NY, Vol. 2, 1994, pp. 175-198.
  70. Dickey, T. and Peterson, G. P., "An Experimental and Analytical Investigation of the Operational Characteristics of a CPL," AIAA J. Thermophysics and Heat Transfer, Vol. 8, No. 3, July 1994, pp. 602- 607, (also as AIAA Paper No. AIAA-93-2746, Orlando, FL, July 6-9, 1993).
  71. Juhasz, A. and Peterson, G. P., "A Review of Advanced Radiator Technologies for Spacecraft Power Systems and Space Thermal Control," A Critical Review of Space Nuclear Power and Propulsion 1984-1993, M. El.-Genk (ed.), American Institute of Physics, New York, NY, 1993, pp. 407-442.
  72. Ma, H. B., Peterson, G. P. and Lu, X. J., "The Influence of the Vapor-Liquid Interactions on the Liquid Pressure Drop in Triangular Microgrooves," Int. J. Heat Mass Transfer, Vol. 37, No. 15, October 1994, pp. 2211-2219.
  73. Duncan, A. B. and Peterson, G. P., "A Review of Microscale Heat Transfer," Invited Review Article, Applied Mechanics Review, Vol. 47, No. 9, September 1994, pp. 397-428.
  74. Kim, B. H. and Peterson, G. P., "Theoretical and Physical Interpretation of Entrainment Phenomenon in Capillary-driven Heat Pipes Using Hydrodynamic Instability," Int. J. Heat Mass Transfer, Vol. 37, No. 17, November 1994, pp. 2647-2660.
  75. Mittlebach, M., Vogd, C., Fletcher, L. S. and Peterson, G. P., "The Interface Pressure Distribution and Contact Conductance of Bolted Joints," ASME J. Heat Transfer, Vol. 116, No. 4, November 1994, pp. 823-828. (also as ASME Vol. HTD 212, ASME New York N.Y., pp. 9-18, November 8-12, 1992).
  76. Peng, X. F., Wang, B. X., Peterson, G. P. and Ma, H, "Experimental Investigation of Heat Transfer in Flat Plates with Rectangular Microchannels," Int. J. Heat Mass Transfer, Vol. 38, No. 1, January 1995, pp. 127-138.
  77. Peng, X. F. and Peterson, G. P., "The Effect of Thermofluid and Geometrical Parameters on Convection of Liquids Through Rectangular Microchannels," Int. J. Heat Mass Transfer, Vol. 38, No. 4, 1995, pp. 755-758.
  78. Swanson, L. and Peterson, G. P., "The Interfacial Thermodynamics of Capillary Structures in Micro Heat Pipes," ASME J. Heat Transfer, Vol. 117, No. 1, 1995, pp. 195-201, (also in ASME Vol. HTD Vol. 253, ASME New York N.Y., pp. 45-52, August 8-11, 1993).
  79. Ochterbeck, J. M., Peterson, G. P. and Ungar, E. K., "Depriming/Rewetting of Arterial Heat Pipes: Comparison with Share-II Flight Experiment," AIAA J. Thermophysics and Heat Transfer, Vol. 9, No. 1, 1995, pp. 101-108.
  80. Kim, B. H. and Peterson, G. P., "Analysis of the Critical Weber Number at the Onset of Liquid Entrainment in Capillary Driven Heat Pipes," Int. J. Heat Mass and Transfer, Vol. 38, No. 8, 1995, pp. 1427-1442.
  81. Mallik, A. K. and Peterson, G. P., "Steady-State Investigation of Vapor Deposited Micro Heat Pipe Arrays," ASME J. Electronic Packaging, Vol. 117, No. 1, 1995, pp. 75-81.
  82. Peterson, G. P. and Mallik, A. K., "Transient Response Characteristics of Vapor Deposited Micro Heat Pipe Arrays," ASME J. Electronic Packaging, Vol. 117, No. 1, 1995, pp. 82-87.
  83. Ochterbeck, J. M. and Peterson, G. P., "Experimental Investigation of Freezing Blowby in a Copper/Water Heat Pipe," AIAA Journal of Thermophysics and Heat Transfer, Vol. 9, No. 2, 1995, pp. 314-321.
  84. Duncan, A. B. and Peterson, G. P., "Charge Optimization of Triangular Shaped Micro Heat Pipes," AIAA J. Thermophysics and Heat Transfer, Vol. 9, No. 2, 1995, pp. 365-367 (also in ASME Vol. HTD 278, ASME New York N.Y., pp. 1-10, June 20-23, 1994).
  85. Ma, H. B. and Peterson, G. P., “Thermodynamic Analysis of the Influence of Electric Fields on Frost Formation,” AIAA J. Thermophysics and Heat Transfer, Vol. 9, No. 3, 1995, pp. 562-564.
  86. Mallik, A. K., Peterson, G. P. and Weichold, M. H., "Fabrication of Vapor Deposited Micro Heat Pipes Arrays as an Integral Part of Semiconductor Devices," ASME J. of Micromechanical Systems, Vol. 4, No., 3, September 1995, pp. 119-131.
  87. Howard, A. and Peterson, G. P., "Investigation of a Heat Pipe Array for Convective Cooling," ASME J. Electronic Packaging, Vol. 117, No. 4, September 1995, pp. 208-214, (also in ASME Vol. HTD 278, ASME New York N.Y., pp. 11-20, June 20-23, 1994).
  88. Peterson, G. P., "Heat Pipes in the Thermal Control of Electronic Components," J. Electrical and Mechanical Engineering, Vol. 4, 1995, pp. 23-31, (also in Proc. 3rd Int'l Heat Pipe Symposium, Tsukuba, Japan, pp. 2-12, September 12-14, 1988.
  89. Peng, X. F., Christopher, D. M., Wang, B. X. and Peterson, G. P., "Melting in a Heat Pipe in a Microgravity Environment," J. Basic Science and Engineering, Vol. 3, No. 4, 1995, pp. 406-413.
  90. Harris-Howard, A., Ochterbeck, J. M. and Peterson, G. P., "The Effect of Multiple Layering on the Thermal Contact Conductance of Vapor Deposited Metallic Coatings," ASME J. Heat Transfer, Vol. 117, No. 4, 1995, pp. 828-834.
  91. Peng, X. F. and Peterson, G. P., "Frictional-Flow Characteristics of Water Flowing Through Rectangular Microchannels," J. Experimental Heat Transfer, Vol. 7, No. 4, 1995, 249-264.
  92. Peng, X. F., Peterson, G. P. and Wang, X. F., "Heat Transfer Characteristics of Water Flowing Through Microchannels," J. Experimental Heat Transfer, Vol. 7, No. 4, 1995, 265-283.
  93. Peng, X. F., Peterson, G. P. and Wang, B. S., "Flow Boiling of Binary Mixtures in Microchanneled Plates," Int. J. Heat & Mass Transfer, Vol. 39, No. 6, 1996, pp. 1257-1264.
  94. Peng, X. F. and Peterson, G. P., "Forced-Convection Heat Transfer of Single-Phase Binary Mixtures," Experimental Thermal and Fluid Science, Vol. 12, No. 1, 1996, pp. 98-104.
  95. Ma, H. B., Peterson, G. P. and Peng, X. F., "Experimental Investigation of Countercurrent Liquid-Vapor Interactions and its Effect on the Friction Factor," Experimental Thermal and Fluid Science, Vol. 12, No. 1, 1996, pp. 25-32.
  96. Peterson, G. P. and Ma, H. B., "Analysis of Countercurrent Liquid-Vapor Interactions and the Effect on the Liquid Friction Factor," Experimental Thermal and Fluid Sciences, Vol. 12, No. 1, 1996, pp. 13-24.
  97. Peng, X. F. and Peterson, G. P., "Convective Heat Transfer and Flow Friction for Water Flow in Microchannel Structures," Int. J. Heat & Mass Transfer, Vol. 39, No. 12, 1996, pp. 2599-2608.
  98. Shatto, D. P. and Peterson, G. P., "A Review of Flow Boiling Heat Transfer with Twisted Tape Inserts," J. Enhanced Heat Transfer, Vol. 3, No. 4, 1996, pp. 233-257.
  99. Peterson, G. P. and Ma, H. B., "Theoretical Analysis of the Maximum Heat Transport in Triangular Grooves: A Study of Idealized Micro Heat Pipes," ASME J. Heat Transfer, Vol. 118, No. 4, pp. 731-739, 1996 (also in HTD-Vol. 317-1, ASME New York N.Y., pp. 185-192, November 12-17, 1995, San Francisco, CA).
  100. Ha, J. M. and Peterson, G. P., "The Interline Heat Transfer of Evaporating Thin Films along a Micro Grooved Surface," ASME J. Heat Transfer, Vol. 118, No. 4, pp. 747-755, 1996, (also as ASME Paper No. 95-WA/HT-20, 1995 ASME IMECE Meeting, November 12-17, 1995, San Francisco, CA).
  101. Ma, H. B. and Peterson, G. P., "Experimental Investigation of the Maximum Heat Transport in Triangular Grooves," ASME J. Heat Transfer, Vol. 118, No. 4, pp. 740-746, 1996.
  102. Peterson, G. P., "Modeling, Fabrication and Testing of Micro Heat Pipes: An Update," Invited Review Article, Applied Mechanics Review, Vol. 49, No. 10, Part 2, pp. 175-183, October 1996.
  103. Ma, H. B. and Peterson, G. P., "The Capillary Limit in a Micro Heat Pipe, Heat Transfer Science and Technology, ed. Wang Buxuan, Higher Education Press, Bejing, China, 1996, pp. 341-347.
  104. Pop, I, Angirasa, D. and Peterson, G. P., "Natural Convection in Porous Media near L-shaped Corners," Int. J. Heat & Mass Transfer, Vol. 40, No. 2, pp. 485-490, January 1997.
  105. Ma, H. B. and Peterson, G. P., "Temperature Variation and Heat Transfer in Triangular Grooves with and Evaporating Film," AIAA J. Thermophysics and Heat Transfer, Vol. 11, No. 1, pp. 90-98, 1997, (also as AIAA 96-3973, 1996 National Heat Transfer Conference, August 3-5, 1996, Houston, TX).
  106. Angirasa, D., Peterson, G. P. and Pop, I., "Combined Heat and Mass Transfer by Natural Convection in a Saturated Thermally Stratified Porous Medium," Numerical Heat Transfer - Part A, Vol. 31, pp. 255-272, 1997.
  107. Peterson, G. P. and Chang, S. C., "Heat Transfer and Evaluation for Two-Phase Flow in Porous Channel Heat Sinks," Numerical Heat Transfer - Part A, Vol. 31, pp. 113-130, 1997, (also in ASME HTD Vol. 334-3, ASME New York N.Y., pp. 261-269, November 12-17, 1996).
  108. Angirasa, D., Peterson, G. P. and Pop, I., "Combined Heat and Mass Transfer by Natural Convection with Opposing Buoyancy Effects in a Fluid Saturated Porous Medium," Int. J. Heat & Mass Transfer, Vol. 40, No.12, pp. 2755-2733, 1997.
  109. Ma, H. B. And Peterson, G. P., "Laminar Friction Factor in Microscale Ducts of Irregular Cross-section," Microscale Thermophysical Engineering, Vol. 1, No. 3, July 1997, pp. 253-265.
  110. Angirasa, D. and Peterson, G. P., "Natural Convection Heat Transfer from an Isothermal Vertical Surface to a Fluid Saturated Thermally Stratified Porous Medium," Int. J. Heat & Mass Transfer, Vol. 40, No. 18, August ,1997, pp. 4329-4338.
  111. Dickey, J. T. and Peterson, G. P., "High Heat Flux Heat Absorption Utilizing Porous Materials with Two-Phase Heat Transfer," ASME J. Energy Resources Technology, Vol. 119, No. 3, 1997, pp. 171-179, (also in Energy Week Conference Proc., Vol. IV, Houston, TX, January 29-February 3, 1996, pp. 12-21).
  112. Shatto, D., Besley, J., and Peterson, G. P., "Visualization Study of Flooding and Entrainment in a Closed Two-Phase Thermosyphon," AIAA J. Thermophysics and Heat Transfer, Vol. 11, No. 4 , 1997, pp. 579-582, (also as AIAA Paper No. 96-1832, 31st AIAA Thermophysics Conference, New Orleans, LA June 17-20, 1996).
  113. Ma, H. B. and Peterson, G. P., “The Minimum Meniscus Radius and Capillary Heat Transport Limit in Micro Heat Pipes," ASME J. Heat Transfer, Vol. 120, No. 1, 1998, pp. 227-233, (also in Proc. ASME Heat Transfer Division, HTD-Vol. 62, Dallas, TX, November 16-21, 1997, pp. 213-220).
  114. Peterson, G. P. and Chang S. C., "Two-Phase Heat Dissipation Utilizing Porous-Channels of High Conductivity Material," ASME J. Heat Transfer, Vol. 120, No. 1, 1998, pp.243-252.
  115. Benson, D. A., Adkins, D. R., Mitchell, R. T., Tuck, M. R., Palmer, D. W. And Peterson, G. P., "Ultra High Capacity Micro Machined Heat Spreaders," Microscale Thermophysical Engineering, Vol. 2, No. 1, January 1998, pp. 21-29.
  116. Ha, J. M. and Peterson, G. P., "Capillary Performance of Evaporating Flow in Micro Grooves: An Analytical Approach for Very Small Tilt Angles," ASME J. Heat Transfer, Vol. 120, No. 2 1998, pp. 452-457.
  117. Angirasa, D. and Peterson, G. P., "Upper and Lower Rayleigh Number Bounds for Two-Dimensional Natural Convection Over a Finite Horizontal Surface Situated in a Fluid -Saturated Porous Medium," Numerical Heat Transfer - Part A, Vol. 33, 1998, pp. 477-493.
  118. Peterson, G. P. and Ha, J. M., "Capillary Performance of Evaporating Flow in Micro Grooves: Approximate Analytical Approach and Experimental Investigation," ASME J. Heat Transfer, Vol. 120, No. 3, 1998, pp. 743-751.
  119. Hu, H. Y., Peterson, G. P., Peng, X. F. And Wang, B. X., "Interphase Fluctuation Propagation and Superposition Model for Boiling Nucleation," Int. J. Heat and Mass Transfer, Vol. 41, No. 22, 1998, pp. 3483-3490.
  120. Ma, H. B., Peterson, G. P. and Pratt, "Disjoining Pressure Effect on the Wetting Characteristics in a Capillary Tube,” Microscale Thermophysical Engineering, Vol. 2, No. 4, 1998, pp. 283-297.
  121. Ha, J. M. and Peterson, G. P., "The Maximum Heat Transport Capacity of Micro Heat Pipes," ASME J. Heat Transfer, Vol. 120, No. 4, 1998, pp. 1064-1071.
  122. Angirasa, D. and Peterson, G. P., "Natural Convection Below a Downward Facing Heated Horizontal Surface in a Fluid Saturated Porous Medium," Numerical Heat Transfer - Part A, Vol. 34, 1998, pp. 301-311.
  123. Angirasa, D. and Peterson, G. P., "Forced Convection Heat Transfer Augmentation in a Channel with a Localized Heat Source Using Fibrous Material," ASME J. Electronic Packaging, Vol. 121, No.1, 1999, pp. 1-7.
  124. Peterson, G. P. and H. B. Ma. “Temperature Response and Heat Transfer in a Micro Heat Pipe,” ASME J. Heat Transfer, Vol. 121, No.2, 1999, pp. 438-445.
  125. Shatto, D. and Peterson, G. P., "Pool Boiling Critical Heat Flux in Reduced Gravity," ASME J. Heat Transfer, Vol. 121, No.4, 1999, pp. 865-873.
  126. Peterson, G. P., “Short Comment on Heat Transfer in the New Millennium,” ASME J. Heat Transfer, Vol. 122, No.1, 2000, pp. 6.
  127. Zhang, J. T., Peng, X. F. and Peterson, G. P., “Analysis of Phase Change Mechanisms in Microchannels using Cluster Nucleation Theory,” Microscale Thermophysical Engineering, Vol. 4, No. 3, 2000, pp. 177-188.
  128. Zhang, J. T., Peng, X. F and Peterson, G. P., “Experimental Investigation of the Hydrodynamics of Falling Liquid Film Flow by Nonlinear Description,” Int’l. J. Heat and Mass Transfer, vol. 43, no. 20, 2000, pp. 3847-3852.
  129. Wang, Y., Ma, H. B. and Peterson, G. P., “Investigation of the Temperature Distributions in Radiator Fins with Micro Heat Pipes,” AIAA J. Thermophysics and Heat Transfer, Vol. 15, no. 1, 2001, pp. 42-50.
  130. Westheimer, D. and Peterson, G. P., “Visualization of Flow Boiling in an Annular Heat Exchanger under Micro Gravity Conditions,” AIAA J. Thermophysics and Heat Transfer, Vol. 15, no. 3, 2001, pp. 333-340.
  131. Barron, R., Hu, H. and Peterson, G. P., “Experimental Evaluation of Triangular Microgrooves on a Condensing Surface,” AIAA J. Thermophysics and Heat Transfer, Vol. 15, no. 4, 2001, pp. 401-408.
  132. Wang, Y., Ma, H. B. and Peterson, G. P., “Analysis of Wire Bonded Micro Heat Pipe Arrays,” AIAA J. Thermophysics and Heat Transfer, Vol. 16, No. 3, 2002, pp. 346-355.
  133. Ma, H. B. and Peterson, G. P., "The Influence of the Thermal Conductivity on the Heat Transfer Performance in a Heat Sink,” ASME J. Electronic Packaging, Vol. 24, No. 3, 2002, pp. 164-169.
  134. Wang, Y. and Peterson, G. P., “Optimization of Micro Heat Pipe Radiators in a Radiation Environment,” AIAA J. Thermophysics and Heat Transfer, Vol. 16, No. 4, 2002, pp. 537-546.
  135. Wang, Y. and Peterson, G. P., “Analytical Model for Capillary Evaporation Limitation in Thin Porous Layers,” AIAA J. Thermophysics and Heat Transfer, Vol. 17, No. 2, 2003, pp. 145-150.
  136. Wang, Y. and Peterson, G. P., “Capillary Evaporation in Microchanneled Polymer Films,” AIAA J. Thermophysics and Heat Transfer, Vol. 17, No. 3, 2003, pp. 354-359.
  137. Li, J., Peterson, G. P. and Cheng, P. “Three-Dimensional Analysis of Heat Transfer in a Micro Heat Sink with Single Phase Flow,” Int’l. J. Heat and Mass Transfer, vol. 47, 2004, pp. 4215-4231.
  138. Wang, Y. and Peterson, G. P., “Investigation of Novel Flat Heat Pipe,” ASME J. Heat Transfer, Vol. 127, no. 1, 2005, pp. 165-170.
  139. Jiao, A., Reigler, R. Ma, H. B. and Peterson, G. P, “Thin Film Evaporation Effect on Heat Transport Capability in a Grooved Heat Pipe,” J. Microfluidics and Nanofluidics, vol. 1, 2005, pp.227-233, (also in Proc. of the 13th International Heat Pipe Conference, Shanghai, China, September 21-25, 2004).
  140. Li, J., Cheng, P., Peterson, G. P. and Xu, J.Z., “Rapid Transient Heat Conduction in Multi-Layer Materials with Pulsed Heating Boundary,” Numerical Heat Transfer (part A), Vol. 47, no. 7, 2005, pp. 633-652.
  141. Li, J., Cheng, P., Peterson, G. P., “Mechanical Non-equilibrium Considerations in Homogeneous Bubble Nucleation for Unsteady-state Boiling,” Int’l. J. Heat and Mass Transfer, Vol. 48, 2005, pp. 3081-3096.
  142. Rothman, S. M., Smyth, M. D., Yang, X. F. and Peterson, G. P., “Focal Cooling for Epilepsy,” Epilepsy and Behavior, Vol. 7, July 2005, pp. 214-221.
  143. Li, J. and Peterson, G. P., “Microscale Heterogeneous Boiling on Smooth Surfaces from Bubble Generation to Bubble Dynamics,” Int’l. Heat and Mass Transfer, Vol. 48, 2005, pp. 4316-4332.
  144. Kim, B. H. and Peterson, G. P. “An Experimental Study on the Operating Characteristics and Performance Measurement of a Reversible Loop Heat Pipe,” AIAA J. Thermophysics and Heat Transfer, accepted for publication December 31, 2004, in press.
  145. Li, J. and Peterson, G. P., “Geometric Optimization of a Micro Heat Sink with Liquid Flow,” IEEE Tran on Comp. and Packaging Technologies, accepted for publication with revisions January 3, 2005, in press.
  146. Carbajal, G., Sobhan, C. B. and Peterson, G. P, “Dimensionless Governing Equations for Vapor and Liquid Flow Analysis of Heat Pipes,” AIAA J. Thermophysics and Heat Transfer, accepted for publication, March 10, 2005.
  147. Ma, H. B., Lofgreen, K. P. and Peterson, G. P., “An Experimental Investigation of a High Flux Heat Pipe Heat Sink, ASME J. Electronic Packaging, accepted for publication, April 24, 2005.
  148. Li, Ji. and Peterson, G. P., “Boiling Nucleation and Two-Phase Flow Patterns in Forced Liquid Flow in Microchannels,” Int’l. Heat and Mass Transfer, accepted for publication, April 26, 2005, in press.
  149. Carbajal, G., Sobhan, C. B. and Peterson, G. P., “Numerical Study of Heat Pipe Heat Spreaders with large Periodic Heat Inputs,” AIAA J. Thermophysics and Heat Transfer, accepted for publication, May 29, 2005.
  150. Chen, Y., Sobhan, C. B. and Peterson, G. P, “Review of Condensation Heat Transfer in Microgravity,” AIAA J. Thermophysics and Heat Transfer, accepted for publication, August 19, 2005.
 		Additional Information


Let us know what you think of our site!