Managed Services & Consulting
online resources for managed services
 

Managed Services/UnixOps Root Certificate Installation

(Note: with the exception of slight differences in text in the dialog boxes, these instructions can be followed for Microsoft Windows XP.)

1. Please download the MS&C Root CA Certificate below and save it to your local hard drive (this is for use with any MS&C signed web sites:

• Managed Services/UnixOps Root Certificate This is the top level of the PKI chain
  md5 checksum: 341bf607a629201733f7bdfc2ab7f875

2. Once you have clicked the above link, you should see the following:

3. Save the file to disk, and remember where it is. Your desktop may be the easiest place.

4. Browse to the location of where the above certificate was saved to. It should look similar to:

5. Double-click the certificate you just downloaded. If this is the correct certificate (look at the Issued to: line), click the Install Certificate button.

6. Click the Next button.

7. Click the Next button again.

8. Click the Finish button.

9. Click the Yes button.

10. You should see The import was successful dialog box. Click OK, and you're done.
(Note: If this is the first time installing this certificate, you will still see a red X at the top.Click OK and close it. If you double click the certificate again, you will see that it is now trusted.)

11. Ensure you have installed the client certificate as well. If you have not already done this, instructions are available here.

Get Help
IT Service Center
303-735-4357 (5-HELP from an on-campus phone)
help@colorado.edu