Lecture Schedule
|
Date |
Lecture Topic(s) |
Reading Assignment |
Reading Questions* |
Workshop |
Workshop Solution |
|
1/13/09 |
N/A |
No |
N/A |
N/A |
|
| 1/15/09 | Factor of safety | 1.7, 2.1, 2.4 | Solution | 1-Tensile rod design | |
| 1/20/09 | Stress | 4.0-4.7 | Solution | 2-Mohr's circles | Yes |
| 1/22/09 | Shear, bearing & tearout | 4.8 | Solution | 3-Eccentric pin joint | Yes |
| 1/27/09 | Bending stress | 4.9 | Solution | 4-Hollow shaft bending | Yes |
| 1/29/09 | Beam deflection, torsion | 4.10 (pp. 160-162 only) 4.12 |
Solution | 5-Beam deflection | Yes |
| 2/3/09 |
Combined stresses Spring rates |
4.13,14 | Solution | 6-Combined stresses | Yes |
| 2/5/09 | Columns | 4.16 | Solution | 7-Compressive members | Yes |
| 2/10/09 | Static failure theories | 5.0-5.2 | Solution | 8-Static factor of safety | Yes |
| 2/12/09 | Fatigue failure | 6.0-6.1 Skim 6.2-6.5 6.6 |
Solution | 9-Fatigue strength | Yes |
| 2/17/09 | Stress concentrations | 6.7 | RQ10 solution | 10-Stress concentrations | Yes |
| 2/19/09 | Fluctuating load fatigue | 6.11 | RQ 11 solution | 11-Fluctuating stress | Yes |
| 2/24/09 | Shafts - intro | 9.0-9.6, 9.10 | RQ12 solution | 12-Shaft key factor of safety | Yes |
| 2/26/09 | Shaft vibration, couplings | 9.14, 15 | RQ13 solution | 13-Shaft design (fatigue) | Yes |
| 3/3/09 | Bearings | 10.0, 10.8-11 | RQ14 solution | 14-Ball bearing selection | Yes |
| 3/5/09 | MID-TERM EXAM Exam solution |
Exam Study Guide | N/A | N/A | N/A |
| 3/10/09 | Exam review | N/A | N/A | N/A | N/A |
| 3/12/09 | Springs | 13.0-5 | RQ15 solution | 15-Compression spring | Yes |
| 3/17/09 | Springs 2 | 13.7,8 | RQ16 solution | 16-Spring fatigue | Yes |
| 3/19/09 | Spur gears | 11.0-3 | RQ17 solution | 17-Gearing basics | Yes |
| 3/31/09 | Gear trains | 11.5 | RQ18 solution | 18-Truck transmission | Yes |
| 4/2/09 | Spur gear design | 11.7-9, 11 | RQ19 solution | 19-Planetary gears | Yes |
| 4/7/09 | Other gears | 12.0-5 | Yes | 20-Bevel gears | Yes |
| 4/9/09 | WIDE RIGHT COMPETITION | BUSINESS FIELD | No | N/A | N/A |
| 4/14/09 | Threaded fasteners | 14-0,1; 3-4 | Yes | 21-Fastener stiffness | Yes |
| 4/16/09 | Fatigue of fasteners | 14-7, 8 | No | 22-Fastener fatigue | Yes |
| 4/21/09 | Fastener groups, welding | 14-10 | No | 23-Welded connections | Yes |
| 4/23/09 | Clutches & brakes | 15.0-5 | Yes | 24-Disk clutch design | |
| 4/28/09 | Design for Manufacturability | --- | No | ||
| 4/30/09 |
Final exam
review Review outline |
--- | No |
*Read the assigned sections, complete the reading questions (click on link) and bring to class