UCB Wireless—Connecting Windows Mobile 5 Devices to UCB Wireless

ITS Help Documents >> Connect to Campus Internet Services >> UCB Wireless >> Connecting a Windows Mobile 5 device to UCB Wireless

Overview

You can setup your Windows Mobile 5 device to connect to CU's wireless internet, UCB Wireless. Follow these instructions to setup UCB Wireless on your Windows Mobile device. Note: Some devices need to have their wireless capabilities turned on. Check to see if your device has a hardware switch for wireless capabilities.

Instructions

1. Select the Start menu.

2. Select Settings.

3. Select Connections.

4. Select Wireless LAN.

5. Select Advanced.

6. Find the six character address under MAC, and write this down. You'll enter this in the manual registration page

7. Go to the Manual Registration page, and enter in the 6 character address.

8. Restart your device.

9. Enable your wireless card.

10. When a notification appears indicating that the card has been activated, choose the Internet Radio button.

11. Select Settings.

12. A bubble will appear showing that UCB Wireless was detected. Select OK.

13. Your device should now be connected to the network and internet.

Get Help
IT Service Center
303-735-4357 (5-HELP from an on-campus phone)
help@colorado.edu